# Stack Emission Monitoring & Stack Emission Testing
# STACK EMISSIONS MONITORING
(Refer Emission Regulations Part III and IS – 11255 Parts 1 to 4)
Monitoring Requirements for Industries:
Central Pollution Control Board’s Emission Regulations Part III emphasizes on the requirement of Stack Emissions and Ambient Air Quality monitoring by the Industrial Units. Further in the General Requirements, therein, it also lay down that the Stack Monitoring shall be done following the frequency given for each industry.
The parameters for monitoring in addition to the Pollutants must include the Air Flow rate and the production during the period of sampling. In case of Ambient Air Quality, it shall be done on 24 hour basis on every alternate day and the parameters for monitoring in addition to pollutants shall include data on Wind Speed and direction and Wet and Dry Bulb Temperatures. Emission Regulations also lay down the frequency of Ambient Air and Source Emission monitoring for major industries like Cement, Thermal Power, Integrated Iron & Steel, Fertilizers, Nitric & Sulphuric Acids, Primary Aluminium, Carbon Black, Calcium Carbide & Oil Refineries.
Stack Emission Monitoring & Stack Emission Testing
Stack Emission monitoring is referred to as
# Stack emission testing,
# Stack emission monitoring,
# Stack sampling,
# Source Emission Monitoring or Source Testing.
It is a process to measure the emission of industrial waste or pollutants emitted into the atmosphere. The pollutants emitted from the stack can be solid, gaseous, liquid organic or inorganic.
Warm regards,
Lokesh Jaswani (Managing Director)
GURUKRIPA ENVIRO CARE PVT LIMITED
Complete Enviro Solution
Address: J-491/492, Near Chatrala Circle,
Sitapura Industrial Area, Jaipur (Rajasthan) - 302022
Email: info@gurukripaenviro.com
Mobile: +91-9928911231
Website: www.gurukripaenviro.com
